Intermec 7.2V 600 mAh Replacement Battery
Replacement battery for the following Intermec Barcode Scanners: RT1000 SERIES, RT1100 SERIES
Replaces: 317-078-002, 317-078-002A, HNN9044A, 317078002, 317078002A
Type: NiCAD Voltage: 7.2 Capacity: 600 mAh Warranty: 12 Months
| Product ID | 384762396 |
| Vendor | INTERMEC |
BatteryBankOnline.com is not affiliated in any way with any of the manufacturers listed in this cross reference. Any trademarks or model numbers listed here are identified for compatibility or cross-reference purposes only.
Rated output voltage: 17.8V 0.2V
Output voltage: 7 V DC ~ 18.5V DC
Battery capacity extend: 0.8Ah ~ 15Ah (1A current)
1.6Ah ~ 30Ah (2A current)
2.4Ah ~ 45Ah (3A current)
Number of cells: 6-10 NiMH/NiCD cells in series
Charge current: 3A / 0.2A / 2A / 0.1A / 1A / 0.1A
Max. delivered power: 54W
Rated AC input: 100~240VAC 50/60Hz
Input voltage: 90~264VAC
Rated input current: 0.55Arms (220VAC input and full load)
Max. input power: 68W
Accessories Included
1 standard Tamiya Female connector.
Alligator clips (red + black).
Temperature sensor (NTC) cable.
Caution
• The charger is designed for indoor use only. Don't leave the charger unattended during charging.
• The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep away from flammable explosive goods.
• Don't cover the charger when charging, ambient temperature shall not be more than 40oC
• Don't touch the plug.
• Don't leave the batteries and chargers on wood surface or carpet.
• Cut off the power supply before connect or disconnect the charger with batteries.
• Don't try to disassemble the charger, High voltage
Accessories Included
• 1 standard Tamiya connector with Temperature Sensor.
• 1 adapter from standard Tamiya to Mini Tamiya.
• 1 adapter from standard Tamiya to a pair of alligator clip.
Smart Charger Specification FOR 6V-12V NiMH/NiCD Battery Packs 5-10 Cells Packs
• Input: AC 100-240V
• Output: 6-12V, 1A or 2A Connect battery pack to output connector and plug AC power source
• Make sure battery polarity is connected correctly (Red wire is positive)
• Charger will detect battery voltage automatically, Red LED will be on during charging
• When battery is fully charged, current will reduce to trickle charging at 50mA, Green LED will be on
• Battery will be charged at 1A or 2A constant current (selectable)
• Approximate Charging time is about 1.5hrs for 3000mAh battery,1hr for 1800mAh battery
• The charger is designed for faster charging NiCd and NiMH battery packs from 6 to 12V for RC car/Air and Air soft gun
• Don't charge battery packs with voltage less than 6V or greater than 12V and capacity smaller than 1000mAh or larger than 5000mAh
• Battery pack must be made by high drain current cell
• Please contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by Misuse.
Caution The charger is designed for indoor use only. Don't leave the charger unattended during charging.
• The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep away from flammable explosive goods.
• Don't cover the charger when charging, ambient temperature shall not be more than 40oC
• Don't touch the plug.
• Don't leave the batteries and chargers on wood surface or carpet.
• Cut off the power supply before connect or disconnect the charger with batteries.
• Don't try to disassemble the charger; High voltage!
Popular for mini Airsoft NiMH Battery Packs.
Now Compatible for 8.4v/9.6v Large Flat Packs with Included Mini Female to Standard Male Connector!
All-around charging solution for anyone who Airsofts.
Awesome price, great charging time, and Smart Charging capabilities (so you don't have to guess when the battery pack is full).
Not limited to just Airsoft -- use it for any 8.4v or 9.6v NiMH Battery Packs that are used in RC Cars/Airplanes. Just make sure connector is Standard or Mini Tamiya!
Features and Benefits:
• Smart Charger for NiMH battery packs of 8.4V-9.6V (7-8 cells).
• Please use the charger for battery packs with capacity of 1100-1600mAh or Higher.
• Able to auto distinguish bad battery and indicate malfunction.
• Able to activate over-discharged cells.
• Current ram-up way benefits cell capacity and life cycle.
• Unique test mode guarantees high quality.
• Automatically stop when battery pack is fully charged by Delta Peak detection.
• Short circuit & reverse polarity protections.
• Compact battery pack charger with LED.
• Built in mini male tamiya connector (charger side).
• UL Certified
Includes:
• Smart AC Charger for 8.4 - 9.6V NiMH Battery Pack.
• Instruction Manual.
• Packaged in box.
Specifications:
Rating Input Voltage 100~240V AC 50/60Hz
Rating input current 2Amp
Input power <11W
Output voltage Rating 8.4V/9.6V VDC
Output voltage range 7V DC~12DC
Charge Current 600+_60mA
Trickle Current 200+_20mA
Max Output Power 7.3W
Operating Temperature -10~30*C (UL Certification)
Charging Temperature <60˚C
Storage Temperature -30~85*C
Maximal -Delta V 5mV/cell
Cell Voltage <1.56V/cell
Operating Humidity <90% RH
This battery is a replacememnt for the following numbers:
Dual-lite 12-261 and Dual-lite 0120261
Dual-lite 12-542 and Dual-lite 012-0542 and Dual-lite 0120542
This battery is generally used in the following applications:
• Telecommunications
• UPS Systems
• Emergency and exit lighting
• Medical equipment
• Aerospace
• Defense
• Global positioning systems
• Solar
• Electronics
It features:
• Design life: 15 years at 20C (68F)
• UL recognized
• Approved for shipping as non-hazardous, non-spillable
• Operates in any position
8.4V 3800mAh Flat NiMH Battery Pack
Compatible with electric AirSoft guns: MP5SD5, G3SD1, M16VN, FAMASF1, M1AI,KNIGHTS SR16, MP5A4, G3A3, AK47, ASSV, and PSG1,ERA001, ERA003, EROA001, EROA004, EROA005, ERAU001, SDGE0501F2, SDGE0508F2 AEGs, and more..
Advanced NiMH battery with no memory effect.
Battery can be charged anytime without the need to fully discharge.
Fits models: AirSoft electric guns: MP5SD5, G3SD1, M16VN, FAMASF1, M1AI,KNIGHTS SR16, MP5A4, G3A3, AK47, ASSV, and PSG1,ERA001, ERA003, EROA001, EROA004, EROA005, ERAU001, SDGE0501F2, SDGE0508F2 AEGs..
Advanced NiMH battery technology, no battery memory effect.
Battery can be charged anytime without the need to fully discharge
8.4V NiMH 5000mAh Crane Stock Battery Pack
Fits Models:
Upgraded or modified AEG's.
Twice longer firing time than original NiCd Battery
Rapid charge up and long cycle life
Sections:
3 Battery 'Stick' -- 5.35" x 1"
1 Battery to Mini Tamiya Connector -- 3.75" x 1"
Each Battery Cell -- 1.67" x 1"
9.6V NiMH 2000mAh Nun Chuck Battery Pack
Fits in: ERICS27, ERA004, ERICS13, EROA002, EROA003, SDGE0507R, SDGE0501R
Two times longer firing time than original Nicad Battery
Rapidly charge up and long cycle life
Dimensions: 102mm(4") Length; 29.1mm(1.15")Width;14.7mm(0.58")
9.6V NiMH 1600mAh 9.6V Nun Chuck Pack Mini Battery Pack
Fits Models:
Airsoft guns G36C, M4A1-RIS, M4A1, CAR15, MP5A5, MC51, FNP90, AUGRT,AUGM, G3A4, G36, STEYR. For use in ERA002, ERA004, ERICS13, EROA002, EROA003, SDGE0507R2, SDGE0501R2, upgraded and/or modified AEGs.
2 units, each 18 mm in Diameter and 118mm in length
Rapid charge up and long cycle life
High power with high discharge rate
8 minutes firing time at 10A discharge power
Best if stored in temperature 35-70 degrees and keep away from sun light or heat
9.6V Stick NiMH 1600mAh Stick Mini Battery Pack
Fits Models:
Airsoft guns G36C, M4A1-RIS, M4A1, CAR15, MP5A5, MC51, FNP90, AUGRT,AUGM, G3A4, G36, STEYR. AK/G5K folding stock models
232mm L x 17mm D
Rapid charge up and long cycle life
High power with high discharge rate
5+ minutes firing time at 10A discharge power
9.6V 5000mAh Crane Stock NiMH Battery Pack for Airsoft
Fits models: Upgraded or modified AEG's.
Two time longer firing time than original Nicad Battery.
Rapid charge and long cycle life.
Dimensions: 3 Battery 'Stick' -- 5.25" x 1"
2 Battery 'Stick' -- 3.60" x 1"
2 Battery 'Stick' to Connector-- 5.55" x 1"
Replacement Makita batteries are 100% compatible with the original tools
Brand new - We NEVER Sell used or refurbished Batteries!
Fits Makita: 192829-9, 1823, 1835, 193140-2, 1833, 193061-8, 1834, 193159-1,192828-1, 193102-0, 1835F, 193783-0, LS711DWBEK, 8443DWDE, 6343DWDE, 6347DWDE, 5620DWD, 5026DWD,5036DWD, 5046DWD, 4334DWD, JR180DWD, LS800DWD, 5621DWD, LS711D,UB181D, 8444DWDE, 6349DWDE, 6343DWFE, 8443DWFE, 5046DWFE, 5026DWFE,5036DWFE, 5046DWDE, LS800DWB, 5036DWB, 5046DWB, JR180D, JR180DWB,5026DWB, 8443D, SC190DWDE, LS800DWBE, 5026DB, 5036DB, 5046DB batteries
Replacement Makita batteries are 100% compatible with the original tools
Brand new - We NEVER Sell used or refurbished Batteries!
Fits Makita: 11201, 192296-8, 1202, 1200, 192271-4, 192407-5, 1201A, 632268-6,192536-4, 192537-2, 192293-4, 1202A, 6911HDWA, 6911HD, 6211DWHE, 6212DWG, 6311DWHE, 6312DWG, 8411DWHE,6831DWH, 5091DZ, 6911DWH, 6911HDW, 6913DWH, HR160DWH, 6911D,6911DW, 8411D, 8411DW, 6211DH, 6211DWH, HR160DWA, SC130DRA, 6212D,
6212DW, 6311D, 6311DW, 6312D, 6312DW, 6831D, 6831DW, 5091D,5091DWH, 5091DWG, 6913D, 6913DW, 6913DWG, HR160DH, 8412D, 8412DW batteries
Makita replacement batteries are 100% compatible with the original tools
Brand new - We NEVER Sell used or refurbished batteries!
Fits Makita: BH1220, 193346-2, BH1233, 193349-6, BH1220C, BH1233C, BH1220B,BH1233B, BTW120, BTD120, BTW120SA, BTD120SA, BTD120SAE, BTW120SAE, BTW121,TW120D, TW120DRJX, TD122D, TD122DRASP, TD122DRJSP, TD122DRAX,
TD122DRJX, TD123D, TD123DRAX, TD123DRJX, TD123DRJXY, TD123DRJXR,TD124D, TD124DRJX batteries
Makita replacement batteries are 100% compatible with the original tools
Brand new - We NEVER Sell used or refurbished batteries!
Fits Makita: 193981-6, 638347-8, 638347-8-2, 192681-5, 1220, 1222, 192598-26227DWE, 6213DWAE, 6213DWBE, 1050DWD, 4331DWD, 5093DWD, 6835DWD,DA312DWD, UC120DWD, 6216DWDE, 6217DWDE, 6317DWDE, 6916DWDE,6918DWDE, 8413DWDE, VR251DWDE, 6217DWDLE, 6313DWBE, 6314DWBE,6916FDWDE, 6916FDWDE1, 6918FDWDE, 6980FDWDE, UC170DWD, ML120,4013D, UB121D, 6917DWDE, 6917FDWDE, 6914DWDE, ML121(Head Lamp) batteries
Makita replacement batteries are 100% compatible with the original tools
Brand new - We NEVER Sell used or refurbished batteries!
Fits Makita: 192698-8, 1233, 1234, 1235, 193138-9, 193157-5, 192698-A, 1235F,192696-2, 6227DWE, 6213DWAE, 6213DWBE, 1050DWD, 4331DWD, 5093DWD, 6835DWD,DA312DWD, UC120DWD, 6216DWDE, 6217DWDE, 6317DWDE, 6916DWDE,6918DWDE, 8413DWDE, VR251DWDE, 6217DWDLE, 6313DWBE, batteries
Makita replacement batteries are 100% compatible with the original tools
Brand new - We NEVER Sell used or refurbished batteries!
Fits Makita: 1234, 193157-5, 192699-A, 1433, 1435, 1435F, 1434, 193158-3,194172-2, 6333DWBE, 6233DWBE, 1051DWD, 4333DWD, 5094DWD, 5630DWD, JR140DWD,ML143(Flashlight), ML140(Flashlight), 6233D, 6336DWBE, 6339DWDE,6932FDWDE, 6935FDWDE, 6935FDWDEX, 6236DWDE, 6336DWDE, 6337DWDE,8433DWDE, 6237DWDE, 8433D, 6236DWBE, 6228D, 4333D, 6333D, 6336DWB,8433DWFE, UB140DWB, 4332D, 4333DWDE, 4033D, 4033DZ, 1051D, 1051DWF batteries
Our mission is to provide you with a brand new battery for your device. When batteries are discontinued and new product is unavailable re-manufacturing/rebuilding is the perfect alternative.
Rebuilt batteries offer many benefits.
100% compatible with the original tools
100% compatible with the original charger
Less expensive than original batteries
Using your existing casing we can replace the internal cell, clean up the wiring and return your battery pack just like new.
Once we receive your old battery we carefully open the plastic casing of your old screw top battery pack and install a new cell-pack inside. The plastic casing is then re-sealed and returned to you.
••• (Unfortunately, we currently have no clean way of opening the sealed pack battery cases) •••
A rebuilt battery is guaranteed to meet or exceed the original manufacturer specifications and comes with a 1-year warranty.
Please send your old battery directly to our Battery Rebuild Department:
Please include your name, address and phone number.
The Battery Bank
Attn: Rebuild Dept.
2565 Pemberton Rd
Apopka, FL 32703
Our mission is to provide you with a brand new battery for your device. When batteries are discontinued and new product is unavailable re-manufacturing/rebuilding is the perfect alternative.
Rebuilt batteries offer many benefits.
100% compatible with the original tools
100% compatible with the original charger
Less expensive than original batteries
Using your existing casing we can replace the internal cell, clean up the wiring and return your battery pack just like new.
Once we receive your old battery we carefully open the plastic casing of your old screw top battery pack and install a new cell-pack inside. The plastic casing is then re-sealed and returned to you.
••• (Unfortunately, we currently have no clean way of opening the sealed pack battery cases) •••
A rebuilt battery is guaranteed to meet or exceed the original manufacturer specifications and comes with a 1-year warranty.
Please send your old battery directly to our Battery Rebuild Department:
Please include your name, address and phone number.
The Battery Bank
Attn: Rebuild Dept.
2565 Pemberton Rd
Apopka, FL 32703
Ridgid 18.0v 1.5AH Lithium-Ion Battery W/Fuel Gauge #130183040
Includes:
Brand new, original Ridgid 130183040 battery
Specifications:
|
Voltage |
18.0V |
|
Battery Amp Hours |
1.5AH |
|
Battery Style |
Slide On |
|
Battery Chemistry |
Lithium-Ion |
Ridgid 12v 1500mah Li-ION Battery #130188010
Includes:
Brand new, original Ridgid 130188010 battery
Specifications:
|
Voltage |
12V |
|
Battery Amp Hours |
1.5AH |
|
Battery Style |
|
|
Battery Chemistry |
Li-ION |
Battery Weight .50 lbs.
This battery is compatible with the following units:
R82007 12V Cordless Drill
R82238 Impact Drive
R82008 12V Cordless Drill
R82009 12V Drill
R8223400 Jobmax Power Handle
R8223404 Jobmax Multi-Tool Head
Alternate/Obsolete Part Numbers: 200901009, 130446011, 200901019, 200901008, 130446001, 130446007, AC82048, 130188001, R82048, 130446027
Ridgid 18v 2500mah NiMH Battery #130254011
Brand new, original Ridgid 130254011 battery
Specifications:
|
Voltage |
18V |
|
Battery Amp Hours |
2.5AH |
|
Battery Style |
Slide On |
|
Battery Chemistry |
NIMH |
Alternate/Obsolete Part Numbers: 130254003, 130252004, 130254007, 200901012, 200901016, 200901015, 130252001
Ridgid 18v 2500mah O.E.M. NiCad Battery #130254011
Includes:
Brand new, original Ridgid 130254011 battery.
Specifications:
|
Voltage |
18V |
|
Battery Amp Hours |
2.5AH |
|
Battery Style |
Slide On |
|
Battery Chemistry |
NiMH |
|
Battery Weight 2.5 lbs |
|
Battery Length 5.50 inches |
|
Battery Height 2.80 inches |
Alternate/Obsolete Part Numbers: 130254003, 130252004, 130254007, 200901012, 200901016, 200901015, 130252001
Ridgid 18v 1500mah Li-ION Battery #130383025
Includes:Brand new, original Ridgid 130383025 battery
Specifications:
|
Voltage |
18V |
|
Battery Amp Hours |
1.5AH |
|
Battery Style |
Slide On |
|
Battery Chemistry |
Li-ION |
Ridgid 18v 3000mah Li-ION Battery #130383031
Includes:Brand new, original Ridgid 130383031 battery
Specifications:
|
Voltage |
18V |
|
Battery Amp Hours |
3.0AH |
|
Battery Style |
Slide On |
|
Battery Chemistry |
Li-ION |
